Es scheint, dass Ihr Warenkorb noch leer ist
|
|
||||
| Cisco Catalyst 3750X-48T-E - Switch - L3 - managed |
|
|||
| 48 x 10/100/1000 - an Rack montierbar | ||||
| Gruppe | Netzwerkgeräte | |||
| Hersteller | Cisco | |||
| Hersteller Art. Nr. | WS-C3750X-48T-E | |||
| EAN/UPC | 0882658517204 | |||
| Beschreibung | ||||
|
Eine grundlegende Komponente eines Unternehmensnetzwerks ist die LAN-Switching-Infrastruktur, die Anwender, Applikationen und Kommunikationssysteme untereinander verbindet. Seit 1995 ist Cisco Systems führend bei der Innovation des LANSwitching, von der Einführung der Catalyst 5000 Serie bis hin zur Entwicklung der heutigen intelligenten Switch-Plattformen. Die Cisco Catalyst LAN Switches bieten Intelligenz und Leistung nach dem neuesten Stand der Technik und unterstützen die Unternehmensziele durch den Schutz, die Optimierung und die Skalierbarkeit der Infrastruktur.
|
||||
| Hauptmerkmale | ||||
| Produktbeschreibung | Cisco Catalyst 3750X-48T-E - Switch - 48 Anschlüsse - managed - an Rack montierbar | |||
| Gerätetyp | Switch - 48 Anschlüsse - L3 - managed - stapelbar | |||
| Gehäusetyp | An Rack montierbar 1U | |||
| Untertyp | Gigabit Ethernet | |||
| Ports | 48 x 10/100/1000 | |||
| Leistung | Switching Fabric-Bandbreite: 160 Gbps Übertragungsleistung: 101.2 Mpps | |||
| Kapazität | Virtuelle Schnittstellen (VLANs): 1005 Switched virtual interfaces (SVIs): 1000 | |||
| Jumbo-Rahmenunterstützung | 9216 Byte | |||
| Routing Protocol | OSPF, BGP-4, IS-IS, RIP-1, RIP-2, EIGRP, HSRP, PIM-SM, PIM-DM, EIGRP for IPv6, OSPFv3, PIM-SSM, statisches IPv4-Routing, statisches IPv6-Routing, Policy-Based Routing (PBR), RIPng | |||
| Remoteverwaltungsprotokoll | SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, TFTP, SSH, CLI | |||
| Leistungsmerkmale | Austausch von Hot-Swap-Modulen, Layer 2 switching, dynamische IP-Adressenzuordnung, DHCP Support, Auto-Negotiation, ARP-Unterstützung, Trunking, VLAN-Unterstützung, Auto-Uplink (Auto MDI/MDI-X), IGMP Snooping, Syslog-Unterstützung, Traffic Shaping, Broadcast Storm Control, Hochverfügbarkeit, Multicast Storm Control, Unicast Storm Control, Rapid Spanning Tree Protocol (RSTP)-Unterstützung, DHCP-Snooping, Unterstützung für Dynamic Trunking Protocol (DTP), Unterstützung für Port Aggregation Protocol (PAgP), Unterstützung für Trivial File Transfer Protocol (TFTP), Unterstützung für Access Control List (ACL), Quality of Service (QoS), Jumbo-Frames-Support, Virtual Route Forwarding-Lite (VRF-Lite), MLD-Snooping, Dynamic ARP Inspection (DAI), Cisco StackWise Technology, Per-VLAN Spanning Tree Plus (PVST+), Uni-Directional Link Detection (UDLD), Shaped Round Robin (SRR), Link Aggregation Control Protocol (LACP), Remote Switch Port Analyzer (RSPAN) | |||
| Produktzertifizierungen | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ae | |||
| Stromversorgung | Wechselstrom 120/230 V (50/60 Hz) | |||
| Redundante Stromversorgung | Optional | |||
| Abmessungen (Breite x Tiefe x Höhe) | 44.5 cm x 46 cm x 4.5 cm | |||
| Gewicht | 7.4 kg | |||
| Ausführliche Details | ||||
| Allgemein | ||||
| Gerätetyp | Switch - 48 Anschlüsse - L3 - managed - stapelbar | |||
| Gehäusetyp | An Rack montierbar 1U | |||
| Untertyp | Gigabit Ethernet | |||
| Ports | 48 x 10/100/1000 | |||
| Leistung | Switching Fabric-Bandbreite: 160 Gbps Übertragungsleistung: 101.2 Mpps | |||
| Kapazität | Virtuelle Schnittstellen (VLANs): 1005 Switched virtual interfaces (SVIs): 1000 | |||
| Jumbo-Rahmenunterstützung | 9216 Byte | |||
| Max. Einheiten pro Stack | 9 | |||
| Routing Protocol | OSPF, BGP-4, IS-IS, RIP-1, RIP-2, EIGRP, HSRP, PIM-SM, PIM-DM, EIGRP for IPv6, OSPFv3, PIM-SSM, statisches IPv4-Routing, statisches IPv6-Routing, Policy-Based Routing (PBR), RIPng | |||
| Remoteverwaltungsprotokoll | SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, TFTP, SSH, CLI | |||
| Authentifizierungsmethode | Kerberos, Secure Shell (SSH), RADIUS, TACACS+ | |||
| Leistungsmerkmale | Austausch von Hot-Swap-Modulen, Layer 2 switching, dynamische IP-Adressenzuordnung, DHCP Support, Auto-Negotiation, ARP-Unterstützung, Trunking, VLAN-Unterstützung, Auto-Uplink (Auto MDI/MDI-X), IGMP Snooping, Syslog-Unterstützung, Traffic Shaping, Broadcast Storm Control, Hochverfügbarkeit, Multicast Storm Control, Unicast Storm Control, Rapid Spanning Tree Protocol (RSTP)-Unterstützung, DHCP-Snooping, Unterstützung für Dynamic Trunking Protocol (DTP), Unterstützung für Port Aggregation Protocol (PAgP), Unterstützung für Trivial File Transfer Protocol (TFTP), Unterstützung für Access Control List (ACL), Quality of Service (QoS), Jumbo-Frames-Support, Virtual Route Forwarding-Lite (VRF-Lite), MLD-Snooping, Dynamic ARP Inspection (DAI), Cisco StackWise Technology, Per-VLAN Spanning Tree Plus (PVST+), Uni-Directional Link Detection (UDLD), Shaped Round Robin (SRR), Link Aggregation Control Protocol (LACP), Remote Switch Port Analyzer (RSPAN) | |||
| Produktzertifizierungen | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ae | |||
| RAM | 256 MB | |||
| Flash-Speicher | 64 MB | |||
| Statusanzeiger | Port Status, Anschluß-Übertragungsgeschwindigkeit, Anschluß-Duplexmodus, Stromversorgung, System, Link/Aktivität | |||
| Erweiterung/Konnektivität | ||||
| Schnittstellen | 48 x 10Base-T/100Base-TX/1000Base-T - RJ-45 1 x USB Type A 1 x Konsole - Mini-USB, Typ B Management 1 x RS-232 - RJ-45 Management 1 x 10Base-T/100Base-TX - RJ-45 Management 2 x Netzwerk-Stapelvorrichtung | |||
| Erweiterungssteckplätze | 1 (gesamt)/ 1 (frei) x Erweiterungssteckplatz | |||
| Stromversorgung | ||||
| Stromversorgungsgerät | Internes Netzteil | |||
| Installierte Anzahl | 1 | |||
| Max. unterstützte Anzahl | 2 | |||
| Redundante Stromversorgung | Optional | |||
| Plan für redundante Stromversorgung | 1+1 (mit optionaler Stromversorgung) | |||
| Erforderliche Netzspannung | Wechselstrom 120/230 V (50/60 Hz) | |||
| Besonderheiten | Anschluss für Redundant Power System (RPS) | |||
| Verschiedenes | ||||
| Rackmontagesatz | Optional | |||
| MTBF | 171,846 Stunden | |||
| Produktzertifizierungen | TUV GS, CISPR 22 Klasse A, GOST, cUL, NOM, VCCI Klasse A ITE, EN55022 Klasse A, CB, AS/NZS 60950-1, AS/NZ 3548 Class A, CCC, RoHS, UL 60950-1, IEC 60950-1, EN 60950-1, KCC, FCC Part 15 A, CSA C22.2 No. 60950-1 | |||
| Software / Systemanforderungen | ||||
| Software inbegriffen | Cisco IOS IP Services | |||
| Maße und Gewicht | ||||
| Breite | 44.5 cm | |||
| Tiefe | 46 cm | |||
| Höhe | 4.5 cm | |||
| Gewicht | 7.4 kg | |||
| Herstellergarantie | ||||
| Service und Support | Begrenzte Garantie - Lebensdauer Begrenzte Garantie - Netzteil und Lüfter - 5 Jahre Update als neue Release-Fassung - Lebensdauer | |||
| Umgebungsbedingungen | ||||
| Min Betriebstemperatur | -5 °C | |||
| Zulässige Luftfeuchtigkeit im Betrieb | 5 - 95 % (nicht kondensierend) | |||
| Min. Lagertemperatur | -40 °C | |||
| Max. Lagertemperatur | 70 °C | |||
| Technische Daten © 1WorldSync. Technische Änderungen und Irrtümer vorbehalten. | ||||