Groupe
Périphériques réseau
N° article fabricant
ICX7450-48P-E2
Description du produit
Ruckus ICX 7450-48P - Switch - 48 Ports - managed - an Rack montable
Type d'appareil
Switch - 48 Ports - L3 - managed - empilable
Type de châssis
Flux d'air d'avant en arrière an Rack montable 1U
Sous-type
Gigabit Ethernet
Ports
40 x 10/100/1000 (PoE+) + 8 x 10/100/1000 (PoH) + 4 x 10 Gigabit SFP+ + 2 x 40 Gigabit QSFP+
Power over Ethernet (PoE)
PoH
Puissance
Capacité de commutation: 336 Gbit/s Performance de transmission: 250 Mpps Bande passante multiple: 160 Gbps VPN-Durchsatz (IPSec): 10 Gbit/s
Capacité
Virtuelle Interfaces (VLANs): 4096 Spanning Tree Protocol-Instanzen: 254 IPv4-Routes: 15168 IPv6-Routes: 5120 QoS-Hardwarewartschlangen par Port: 8 IPSec Tunnel: 20 Hardware Multicast Gruppen: 8192
Taille de la table d'adresses MAC
32.768 Entrées
Prise en charge des trames Jumbo
9216 Byte
Protocole de routage
IGMPv2, IGMP, IGMPv3, MSDP, statique IPv4-Routing, statique IPv6-Routing, ECMP, MLDv2, MLD
Protocole de gestion à distance
SNMP 1, RMON, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, TFTP, CLI
Caractéristiques
Contrôle de flux, Prise en charge BOOTP, Trunking, Prise en charge VLAN, Auto-Uplink (Auto MDI/MDI-X), IGMP Snooping, Prise en charge Syslog, Protection contre Attaques DoS, Miroitage de port, DiffServ-Prise en charge, WRR Queuing, Filtre d'adresses MAC, IPv6-Prise en charge, Haute disponibilité, Mode full-duplex, LFS, MRP-Prise en charge, sFlow, STP Support, Prise en charge RSTP, PVST, RFN, VSRP-Prise en charge, VLAN Stacking, MSTP Support, DHCP-Snooping, ACL Support, QoS, DOM-Prise en charge, Serveur DHCP, MLD-Snooping, DAI, PVST+, STP Root Guard, UDLD, IPv4-Prise en charge, Prise en charge LACP, Relais DHCP, Port Security, PVRST, portbasierte Contrôle d'accès, Energy Efficient Ethernet, MIB, NTP-Zeitsynchronisation, Ventilateur à chaud, CoS, SP, marqué VLAN, GVRP, IGMP-Proxy, ToS, DSCP-Prise en charge, OpenFlow-Prise en charge, PoH
Certifications du produit
IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1v, IEEE 802.1ab (LLDP), IEEE 802.3at, IEEE 802.3az, IEEE 802.3ba, IEEE 802.1AX, IEEE 802.1BR, IEEE 802.3bt
Alimentation
Courant alternatif 120/230 V (50/60 Hz)
Alimentation redondante
Optionnel
Dimensions (largeur x profondeur x hauteur)
44 cm x 39.37 cm x 4.37 cm
Configuration requise
IBM AIX, SunSoft Solaris, HP-UX, Microsoft Windows
Garantie du fabricant
Limitée lebenslange Garantie (in Allemagne gelten die gesetzlichen Règles de garantie)
Nombre maximal d'unités par pile
12
Algorithme de chiffrement
AES, ECDSA, IKEv2
Méthode d'authentification
RADIUS, TACACS, TACACS+, Secure Shell v.2 (SSH2), Extensible Authentication Protocol (EAP)
Interfaces
40 x 1000Base-T RJ-45 PoE+ - 30 W 1 x USB Type A 1 x 1000Base-T RJ-45 Management 1 x mini-USB Management 4 x 10Gbit-LAN SFP+ Uplink 2 x 40Gbit-LAN QSFP+ Uplink/Stacking 8 x 1000Base-T RJ-45 PoH - 90 W
Emplacements d'extension
3 (total)/ 0 (frei) x Emplacement d'extension
Bloc d'alimentation
Bloc d'alimentation interne - Hot-Plug
Quantité maximale prise en charge
2
Schéma d'alimentation redondante
1+1 (avec optionnel Alimentation)
Puissance fournie
1000 watt
Tension secteur requise
Courant alternatif 120/230 V (50/60 Hz)
Consommation électrique en fonctionnement
106 watt
Système d'exploitation requis
IBM AIX, SunSoft Solaris, HP-UX, Microsoft Windows
Service et assistance
Limitée Garantie - Durée de vie
Température de fonctionnement min.
-5 °C
Température de fonctionnement max.
50 °C
Humidité admissible en fonctionnement
10 - 90 % (non condensant)
Température de stockage min.
-40 °C
Température de stockage max.
70 °C
Humidité admissible en stockage
5 - 95 % (non condensant)