Authentication method
Secure Shell (SSH), RADIUS, TACACS+, MS-CHAP
Device type
Switch - 48 ports - L3 - managed - with 4 x Cisco Nexus 2248TP-E GE Fabric Extender
Dimensions (width x depth x height)
43.9cm x 76.2cm x 4.4cm
Housing type
Rack mountable 1U
Interfaces
48 x SFP+ 6 x QSFP+ 1 x Console RJ-45 Management 1 x 1000Base-T RJ-45 Management 1 x USB
Jumbo frame support
9216 bytes
MAC address table size
256,000 entries
Manufacturer item no.
N5672UP-4FEX-1G
Max. operating temperature
40°C
Max. storage temperature
70°C
Min operating temperature
0°C
Min. storage temperature
-40°C
Performance
Transmission performance: 1.44 Tbit/s
Performance characteristics
Routing, Layer 3 switching, DHCP support, VPN support, ARP support, VLAN support, syslog support, WRR queuing, broadcast storm control, IPv6 support, multicast storm control, unicast storm control, VRRP support, MSTP support, DCBX support, port air inlet, ACL support, QoS, RADIUS support, SSH support, jumbo frames support, DAI, ECMP, BFD, STP Root Guard, URPF, IPv4 support, LACP, PVRST, HSRP support, MIB, MVR, VRF, redundant hot swap fans, static routing, transparent NPIV (N_Port ID Virtualization) mode support, RSCN support, call home function support, FCoE forwarding, STP PortFast, CoS, port fans, MSDP, SNMP support, vPC Technology
Permissible humidity during operation
5 - 95% (non-condensing)
Power supply
AC 120/230V (50/60Hz)
Power supply device
Internal power supply - hot plug
Product certifications
IEEE 802.3, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1Qbb, IEEE 802.1Qaz, FIP v1
Product description
Cisco Nexus 5672UP - Switch - 48 ports - managed - rack mountable - with 4 x Cisco Nexus 2248TP-E GE Fabric Extender
Provided service
1100 watts
Redundant power supply
Yes
Redundant power supply plan
1+1
Remote management protocol
SNMP 1, SNMP 2, RMON, Telnet, SNMP 3, SSH-2, CLI
Required mains voltage
AC 120/230V (50/60Hz)
Routing Protocol
IS-IS, RIP-2, BGP, EIGRP, HSRP, IGMP, VRRP, OSPFv2, PIM-SM, EIGRP for IPv6, OSPF for IPv6, static IPv4 routing, static IPv6 routing, ECMP, Policy-Based Routing (PBR), Bidirectional Forwarding Detection (BFD), BGP for IPv6
Service and support
Limited Warranty - Exchange - 1 year - Response time: 10 days
Software included
Cisco NX OS
Status indicator
Port status
Subtype
10 Gigabit Ethernet
capacity
ARP entries: 256000 Virtual interfaces (VLANs): 4096 ACL entries: 4000 Multiple Spanning Tree Protocol instances: 64 Host table entries (IPv4): 32000 Host table entries (IPv6): 8000 Multicast entries (IPv4): 8000 IGMP snooping entries: 8000 VRF (Virtual Routing and Forwarding) entries: 4000 ECMP (Equal-Cost Multipathing) paths: 64
ports
32 x 1 Gigabit / 10 Gigabit SFP+ + 16 x combo 1 Gigabit / 10Gb Ethernet / 40Gb Ethernet / 2/4/8Gb Fiber Channel / FCoE SFP+ + 6 x 40 Gigabit FCoE QSFP+
